Category: 2) Antigravity Theory


I’m not into detail of explaining my reverse engineering but I have some idea behind it. Mostly because of VSG (Viktor Stepanovich Grebennikov):

  • Using simplest form of construction which I need to think around 80’s what the common ‘cheap’ item to use and what possible material might work.
  • Possible generator or power supply that he use to activate his flying platform.
  • The wood plate that he uses is too thin to put most of known method of propulsion/flying.
  • Controlling method that been published, the Chinese Fan Blade, underneath his flying platform was not possible due to strict space underneath the wooden platform and funny angle that he show from his drawings.
  • The material that he use, of the famous blade, the design and other entity inside the box that attach the pole mostly questionable if we dig out from his book.

So my idea is consist of given point above, and I try to explain as we go along this publishment.

Mid 80’s construction.

I agreed that the wooden box was actually from, roughly rigid, old soviet microscope box with a dimension of 1’ x 2’ x 2”. And the thickness of each wood will be around ½” average.

My reverse engineering, wooden box was 8” x 16” x 1 ½” with thickness of 1/3” average. So my wooden platform was 4” smaller (from every angle) from original VSG flying plate. And this wooden plate was an electrical meter board, that in Malaysia, most likely around 80’s and 90’s still use for their electrical penal box. Nowadays, Malaysia board is using thin enclose metal box (sometime with lock) for better grounding and terminal protection.

two DSCF2850

The possible generator/power supply.

This is kind of tricky, because I need to take this idea into consideration first. Remember in 2nd July 2005, Stan Deyo giving some compelling fact (in his Ancient of Days #3) about UFO’s and antigravity. He did tell us about a story in late 50’s a guy in the air force did find antigravity. Below is some of his story.

“A navigator tells a story after handover a seal envelope to his friend a pilot, which inside envelope consists of the drawings and sketch of his antigravity experiment. In the drawing shows of three level of particle board, some washer, rod, and hook up to a frequency generator. When switch on – nothing happen.

But all of the sudden it lift off, and he amaze, the air underneath become a kind of grey jelly like. And then, he grabs a broom stick and start to play with the field. Afterward when he try to shut it down by disconnect the switch.

Unfortunately the circuit can’t shut down and continue on (with electric arc connected the circuit) until he use the same broom stick to check the field to smash the floating particle board and some huge electrical discharge going up and blast the nearby power transformer in the block.”

The other version that I read, just a few months ago, I found out that the person he refer (or the story kind of similar) and this person had a patent about his finding. And this person story as below.

“In 1967, he got some idea on figure out how Flying Saucer works, and he built a device and tests it in his garage. He built a small unit that can produce 150,000 Volt, thrown by the force field, create a loud bang, and blow his TV, his radio and a power transformer 150 pole from his resident.

And then he was call out on a business (maybe to be a navigator which continue on to Stan Deyo story), and when he gets back the squirrel was to blame (by the electric company) for the blown of the power transformer. The electric company fixes his TV and his radio because of the squirrel reason.

A few weeks later he achieve 500,000 volt with that device and all TV and radio around the neighborhood reported blinking and he goes around fixing the problems.”

Sound familiar? Coincident?  If only this was the same person, or the same event when been tell with different person, with 10 years off between the two insident date. This guy did explain the same story as Stan Deyo told based on a navigator story.

The good thing is this guy (he who not be named) did granted a US patent in 1978. After studies his patent, I think I know how his antigravity works and how this VSG antigravity platform should be work with the same princpal.

Too thin to put a rocket engine.

I try to fit anything to a wooden plate with thickness of 1 and a half inch, not possible. Even if I put high voltage coil, any controlling mechanism and even a stand of open close Chinese Fan small hinge also not successful, so I need to think of something out of the box, not in normal realm of standard physics.

The Chinese Fan – not an actual open and collapse fan.

After seeing VSG underneath picture, I conclude, for my personal reverse engineering, this was not a Chinese fan but rather a louver. The blind is not open and close in a single pole at all. But this blind is open and close (without collapsing) by each blind tilting from zero degree to 45 degree (maximum) in louver hinge like mechanism.

By making this blind (in zero degree) near the wooden box surface, the intensities of the rushing waves from upper atmosphere rushing through VSG and pushing the ground was high. And by tilting some of the blind up to 45 degree, these intensities of the rushing field will be gradually low and he began to land.

The left turn and right turn mechanism also depends on VSG controlling intensities of coordinated blind underneath his wooden platform.

right left turn

Still next to the question, I agree VSG using 4 point geometric pattern underneath his platform but where in the world he get this kind of pattern (in nature) anyway.

I know most probably, some of us did buy or use a powerful microscope, kill enough bug to check and understand how they fly by VSG CSE principal.

Well, VSG did tell the principal (in fragment) inside his book, and I think most of us just tend to ignore it.

Inside VSG book.

I did discuss with Francesco (my friend from Italy) about the c-shaped capacitor that may have some resemble to the picture in VSG book like:

  • His underneath plate (I highlight one of its plate)

NOT CENTER

  • His picture of ground bee (I highlight the c-shape cavity that VSG referring to)

honey bee

I think that both of this drawings shows that VSG using c-shape capacitor in his flying platform

As shown as below

image3151

His controlling method

I already notice that VSG have 4 perpendicular point of blade underneath his flying plate and can be notice in blow up picture below.

As shown as below

pol23-2

Now this design will be seen in my prototype below

  • The original design

theree DSCF2855

  • This will be the overall arrangement & design inside the wooden platform

fourDSCF2854

  • The complete arrangement (based on my reverse engineering terminology) would looks like.

two DSCF2850

Although these reverse engineering still not finish, but the construction wise currently at 20%.

More to be completed soon and will publish more in future.

Advertisements

Received on 05May11, 6.00am
Hi Deacken,

I’ve seen your site, nice work!
Can you please show me a scheme about the driver circuit for the vortex coil?
I’ve built a 12vdc inverter that produces 170vac; it’s a 555 timer circuit that drives a step-up transformer.
I’ve tested it with a vortex coil that I’ve built following your video on youtube, but it doesn’t seem to work, no force is generated.
Where am I wrong?
May it be good for this purpose?
I’ve been searching for years without results about electro-gravity and electrets, now I see an open window with your words, please help me!
Thanks for your time

Francesco (from Italy)

Replied on 05May11 3.00pm
Hi there Francesco,

At first, I read some books that shifted my belief that UFO is not from alien origin at all!

Next stage was to explore from my physics point of view how possible to build my personal UFO with my background in Pure Physics Degree. Only one answer was coming to my mind during all these years…MHD (Magneto Hydro Dynamic)

Then, in 2007 I did read about Victor Grebennikov of his flying plate from Russia. After explore most of you tuber believe of his flying plate using only chitin and not required any electric (which is delivered by video of Jerry Decker), it took me 2 years to experiment with Cavernous Structure Effect (CSE) and any possible geometric shape that produce CSE. Just plain stupid!

Then in November 2008, I did visualized of Vortex Magnetic Field produced by vortex coil (like the one that I published up inside you tube in my name) and by “combining” Magnetic and Electric field together (Lorentz force), I did produce MHD in small scale.

Good things that you did complete the vortex coil, but the vortex coil only produces Magnetic Field in center hole Vortex direction. AC only make the Vortex direction goes from right to left and up and down direction….remember you only produce AC Vortex Magnetic Field with my vortex coil.

The next part that you missing was the High Voltage Electric Field which consist of 2 aluminum plate which will cover up your Vortex coil.

To step up the voltage to high voltage, I’m using small spark plug coil from Yamaha motorcycle.

The connection from battery to 12VDC inverter (only positive AC wire) to vortex coil to step up spark plug coil to aluminum plate. Then, on natural wire from 12VDC inverter will be terminate back to negative of the battery.

Remember to visualized the Magnetic and Electric Field on top of each aluminum plate surface because only the combining force field will produce the MHD anti-gravity effect.

Additional notes: when commissioning, please put the aluminum surface with wooden stand (2 inch in height) because High Voltage spark might jump from aluminum surface to the table and discharge the overall electric field which been produce just above the aluminum surface.

Finally, my complete commissioning of this item (small prototype of UFO) was done around February 2009 with success.

I will follow up my step by step video how to build this small prototype for you to make it as a weekend project.

And my hope was…. there will be full scale of flying vehicle in the near future using my only published video.

Hope this will explain your curiosity.

Thanks

Regards,
Deacken Frost

Dear Fellow Reader,

I’m sorry to hold up all the info because I feel that not everybody ready with antigravity technology that I’m going to published. This technology, after carefully exam and rethink, going to altered time and dimension as human far believe in. As I the Malaysian Born Physicist, I already foresee that this technology can be use as bad and dangerous outcome if falls to wrong hand.

Why I still publish my finding even though I know that this technology do cause more harm than good..?

Below is the reason why and maybe I can share with my fellow reader:
a) My love to a beautiful world of science knowledge and pure physics finding force me to still publish my reverse engineering finding throughout the net.
b) To claim my finding earlier than any other human ought to put their name in these findings.
c) To make the complex idea such as this seems too easy for children to understand which is one day; those children will grows older and rethink on how to overcome any problem reflected by this technology.

Physics had a bad reputation to cause more harm than good, for example the atomic and nuclear bomb. As all three reasons that I give above, an atomic and nuclear knowledge was become better and can; as we all know, harness the pure energy of the universe.

But as everybody knows that the energy which is produce was enormously big in the scale of one drop of water, most of human who are like to have power during their lifetime abuse the energy and that’s become the tragedy of Hiroshima and Nagasaki in 1945.

So what may become of my reverse engineering of antigravity technology?

As I post the comment in http://www.greenoptimistic.com/2008/03/05/how-to-build-an-ufo-like-anti-gravity-spacecraft/

Three un-avoided result by these technology will be:

a) Human body not built into high frequency electromagnetic wave, this will cause cancer in long time exposure.
b) High voltage was one of human known killer from the first strike of lightning in the sky.
c) Time-wrapping force-field which will take the pilot age by years and years in fraction of second.

But as my item (c) reasons to publish these finding, I will make this complex idea seems too easy for children to understand which is one day, maybe, this children will create another technology to overcome the problem which is reflected by this technology.

Now, the question is; should I proceed to reveal the antigravity reverse engineering technology that I ever encounter in my previous oil& gas project back in Bintulu, Malaysia in 2009? I leave the comment to you guys/girl…my fellow good reader.

Wallahualam.

At first, all anti-gravity equation were originated from Lorentz Force equation. The force that being create was a cross product between electric current and magnetic field. A simplest equation to understand will be as below:

F=IL X B

where

F = Force, measured in newtons
I = Current in wire, measured in amperes
B = Magnetic field vector, measured in teslas
X = Vector cross product
L = A vector, whose magnitude is the length of wire (measured in metres), and whose direction is along the wire, aligned with the direction of conventional current flow.

By referring image above, if an electrical wire which carries electrical current goes into magnetic field, the wire will create a force that push to 90 degree from the magnetic field.

I explain this force because it was crucial for my anti-gravity theory. All my theory based on Lorentz force and the only different was instead using DC current and permanent magnet, I used dipole magnet and AC current.

I will explain more on next issues…

Wallahualam

This is interesting….

In April 2009, I conduct one research in UFO and anti-gravity. I know in first entry once you told people that you conduct anti-gravity research, they will fired you, label you as a day dreamer and don’t wanna believe in your word even you did achieve something extra ordinary in your finding.

At the first glance, I don’t think that this blog worth million as I post it and I don’t think that my beloved reader will understand what I’m trying to explain inside my blog. I will try to explain in the lay-term so that my younger reader will understand what I’m trying to say.

It’s all begin with a book by Victor Grebennikov named “My World”. The original book being published in Russian and I did find the original re-type website of his book in the internet. Even though somebody did translate the book to English, I still re-translate the original Russian to English by Systrans Software.


Take off picture of Victor Grebennikov with his ‘Flying Platform’

For introduction, you can read about Victor Grebennikov ‘Flying Platform’ in the link given below:

Wikipedia About Victor Grebennikov
“My World” Chapter 5 on ‘The Flying Platform’

I will add up more of my finding so you can actually test it phase by phase..

Wallahualam