Archive for April, 2011


I’ve been around with Oil & Gas fabricator long enough to see and know how many rate they get to be a welder.

There’s been a lot of Welder Qualification Testing or WQT been done throughout every project that I’ve been involve. And there been a lot of certified been release with level that accepted to the quality of Oil & Gas industries.

The known process involve in Oil & Gas industry will be SMAW, Metal Arc Welding (or normally known as stick welding), GMAW (or MIG welding), GTAW (or TIG welding) and underwater welding.

Below will be the list of welding position that been approved in Oil & Gas industries.

Sheet groove weld position will be:
a) 1G; flat,
b) 2G; horizontal,
c) 3G; vertical
d) 4G; overhead position:

Sheet fillet weld position will be:
a) 1F; flat,
b) 2F; horizontal,
c) 3F; vertical
d) 4F; overhead

Tube groove weld position will be:
a) 1G; horizontal rolled,
b) 2G; vertical,
c) 5G; horizontal fixed
d) 6G; inclined position.

Tube fillet weld position will be:
a) 1F; flat,
b) 2F; horizontal,
c) 4F; overhead,
d) 5F; multiple position

I’m guessing the “G” suffix means “groove”, and the “F” suffix means “fillet”, but we really need confirmation all of this.

The higher paid welder will be 6G and 6GR position and underwater welder.

Enough with introductions, now come the real stories of this blog.

I’ve been thinking a long, long time ago. And tested many time on the method of to weld/braze/solder the aluminum alloy. The problem is not all kind of aluminum alloy can be weld/braze/solder because aluminum alloy tended to oxide right after reaching melting point of 660°C.

My previous idea mostly like to create and built heat sink for my mini HVAC, heat pipe creation for lower pressure water vapor devices, outer layer of my antigravity devices and replacement of copper tube in my water/hydrogen reactor converter. Either using copper material and/or aluminum material, the biggest problem will be to glue aluminum together with strong, chemical & heat resistant with a good of heat conductivity.

After searching the web, I just found out there’s a special flux and special welding rod were use to weld aluminum. Furthermore we must use Inert gas welding machine to complete the job. And it will become burden for me to complete my project if somebody like me using low budget to get expensive tool just to trial and error.

Then, in the middle of Mar2010, after some search in the internet, I just notice that it was a phenomenal problem to weld/braze/solder aluminum. Until I found “as seen on TV” Special Aluminum Brazing Rods. With different commercial name like HTS2000, Dura fix, Aladdin 3 in 1, Alumaloy, Alumaweld, Alumarod etc, the Aluminum Brazing Rods was live up to the claims.

These rods started to melt around 380°C, not using any flux and never oxide. As far as I know the composition of another 2 kind of metal beside Aluminum itself still a trade secret between manufacture. For HTS2000, there were another 8 kind of metal were reported beside the Aluminum itself.

After ordering this Aluminum Brazing Rods, I can continue to braze my aluminum based fabrication project without any hassle because the low melting point and never oxide under braze temperature just by using my mini butane gas torch.

As the product become more variety of cast iron low temperature brazing, stainless steel low temperature brazing and copper low temperature brazing , I’ve keep on thinking, what happen to our welding industries and skillful welder next time when we do WQT? Hahahaha….

Wallahualam..

Dear Fellow Reader,

I’m sorry to hold up all the info because I feel that not everybody ready with antigravity technology that I’m going to published. This technology, after carefully exam and rethink, going to altered time and dimension as human far believe in. As I the Malaysian Born Physicist, I already foresee that this technology can be use as bad and dangerous outcome if falls to wrong hand.

Why I still publish my finding even though I know that this technology do cause more harm than good..?

Below is the reason why and maybe I can share with my fellow reader:
a) My love to a beautiful world of science knowledge and pure physics finding force me to still publish my reverse engineering finding throughout the net.
b) To claim my finding earlier than any other human ought to put their name in these findings.
c) To make the complex idea such as this seems too easy for children to understand which is one day; those children will grows older and rethink on how to overcome any problem reflected by this technology.

Physics had a bad reputation to cause more harm than good, for example the atomic and nuclear bomb. As all three reasons that I give above, an atomic and nuclear knowledge was become better and can; as we all know, harness the pure energy of the universe.

But as everybody knows that the energy which is produce was enormously big in the scale of one drop of water, most of human who are like to have power during their lifetime abuse the energy and that’s become the tragedy of Hiroshima and Nagasaki in 1945.

So what may become of my reverse engineering of antigravity technology?

As I post the comment in http://www.greenoptimistic.com/2008/03/05/how-to-build-an-ufo-like-anti-gravity-spacecraft/

Three un-avoided result by these technology will be:

a) Human body not built into high frequency electromagnetic wave, this will cause cancer in long time exposure.
b) High voltage was one of human known killer from the first strike of lightning in the sky.
c) Time-wrapping force-field which will take the pilot age by years and years in fraction of second.

But as my item (c) reasons to publish these finding, I will make this complex idea seems too easy for children to understand which is one day, maybe, this children will create another technology to overcome the problem which is reflected by this technology.

Now, the question is; should I proceed to reveal the antigravity reverse engineering technology that I ever encounter in my previous oil& gas project back in Bintulu, Malaysia in 2009? I leave the comment to you guys/girl…my fellow good reader.

Wallahualam.